Novel non-stoichiometric (Ba0.91Ca0.09)x(Zr0.18Ti0.82)O3 ferroelectric ceramics with improved diffuse phase transition and dielectric tunable performance

Dielectric tunable properties in ferroelectric ceramics have been optimized by a variety of approaches, e.g., isovalent/aliovalent substitution, system composite et al., while the study of non-stoichiometric regulation on the performance of BCZT ceramics was rarely concerned. Herein, a series of novel non-stoichiometric (Ba_0·91Ca_0.09)_x (Zr_0·18Ti_0.82)O₃ (BCZTx) ceramic specimens were successfully prepared via solid-state reaction. The microstructures of BCZTx ceramics are simultaneously investigated through XRD and SEM. The diffuse phase transition (DPT) behaviour of BCZTx ceramics are studied by the Lorentz-type empirical formula. The significant enhancement of DPT behaviour is observed at x = 1.03, which probably due to the coaction of the generation of partial Schottky defects and prominent reduction of grain size. Furthermore, a high tunability (k) 87.80%, low dielectric loss (tan δ) 0.141%, and a remarkably enhanced FOM of 623 are achieved in x = 0.99 at a low DC bias electric fields (BEFs) of 7.28 kV/cm and room temperature (RT), which is superior to that of the stoichiometric BCZT ceramics and other available reported BT-based ceramics systems in term of the dielectric tunable properties. Meanwhile, it shows that the temperature dependent CQF value of x = 0.99 remained advantageous around the RT. These findings suggested that non-stoichiometric BCZTx ceramics with x = 0.99 are significantly competitive in the applications of dielectric tunable devices at RT. The non-stoichiometric regulation is an effective approach in improving the dielectric tunability properties of BCZT ceramics.     

The effect of stocking density and a blind on the behavior of Holstein dairy cows in group maternity pens. Part II: Labor length,lying behavior,and social behavior

In natural settings, dairy cows separate from the herd to give birth. When kept indoors, seeking isolation before calving may be restricted and may depend on space and resources provided in maternity housing. The effect of group maternity pens on behavior around calving and labor progress is unknown. Therefore, the objective of this study was to determine the effects of stocking density and provision of a blind in group bedded pack maternity pens on lying and social behavior as well as length of labor of preparturient dairy animals. The study was conducted as a complete randomized block design with a 2 × 2 factorial arrangement of treatments including stocking density and presence or absence of a blind, resulting in a total of 4 treatments: (1) high stocking density (7.7–12.9 m² lying space/cow) with a blind, (2) low stocking density (15.4–25.8 m²) with a blind, (3) high stocking density without a blind, and (4) low stocking density without a blind. A total of 127 primiparous heifers and 247 multiparous cows were housed in mixed-parity groups from approximately 3 wk before and immediately after calving. During the 4 h before calving, lying behavior (lying time and bouts) was collected automatically using accelerometers, and social behavior (agonistic interactions, allogrooming, and attention from other cows), stage II labor duration, and frequency of position change during stage II labor were collected using video. Lying behavior was collected with accelerometers. Regardless of treatment, lying time and bouts increased as calving approached. Cows and heifers performed more lying bouts in low stocking density pens compared with high stocking density pens. Agonistic interactions and allogrooming were not different between treatments. Other cows spent more time paying attention to focal animals regardless of stocking density as calving approached, but time spent paying attention was reduced by the presence of a blind during h ?2 before calving. The hazard of calving unassisted was greater for cows and heifers in low stocking density pens with a blind compared with all other treatments. Further, animals in pens with a blind tended to change positions fewer times during stage II labor. These results suggest that providing a blind in group maternity pens may improve the calving environment for cows and heifers and, in combination with low stocking density, may reduce the amount of time spent in labor.     

Patterns and stability of food preferences among a national representative sample of young,middle-aged,and elderly adults in China: A latent transition analysis

The purpose of this study was to explore the patterns and stability of, as well as the predictors for, Chinese adults’ food preferences. With the panel data set derived from the China Health and Nutrition Survey (CHNS), latent class analysis (LCA) and latent transition analysis (LTA) were employed to analyze the data of 8850 adults aged 18–40 years (young), 41–60 years (middle-aged) and 61 years above (elderly) over a 4-year period (year 2011 as baseline and year 2015 as follow-up). Latent class analysis revealed three types of food preferences: preference for fruits and vegetables, preference for a varied diet and low food preference. Gender, dietary knowledge, residence, education, and BMI were revealed as significant predictors of the class memberships. From baseline to follow-up, the most stable status in young adult group was preference for fruits and vegetables as it had a high transition probability 0.764 of remaining in the same class. While low food preference and preference for a varied diet statuses were unstable, they had transition probabilities of 0.590 and 0.554, respectively, moving to the preference for fruits and vegetables in year 2015. For middle-aged and elderly groups, the most stable and unstable statuses were preference for fruits and vegetables and preference for a varied diet, respectively. The unstable classes all had over 50% probability of moving to the preference for fruits and vegetables after four years. Potential explanations and implications are also discussed.     

pH-sensitive self-assembling property of poly(ethyleneimine)/cinnamic acid mixture and its effect on pH-dependent release of monoolein cubic phase

Poly(ethyleneimine) (PEI)/cinnamic acid (CA) mixture was self-assembled into microsphere in aqueous phase. As the pH value increased, the self-assembly became hardly formed. As the molar ratio of the amino group of PEI to the carboxyl group of CA increased, the pH window for the formation of self-assembly became broader. The phase transition temperature of cubic phase was 58.5–67.5°C, depending on the PEI/CA content. The release of dye loaded in cubic phase containing PEI/CA increased in a first-order fashion. The release degree was higher at a lower pH value.     

Costs Impact of a Transition to Hydrogen-fueled Vehicles on the Spanish Power Sector

It is expected that demand response might provide soon ancillary services to the power system. This could be done, for example, by managing the use of Electric Vehicles (EV) batteries, or the production of flexible energy commodities such as hydrogen (H₂), that can be used for fuel cell vehicles (H2EV) or in industrial processes. This paper analyses the impact of a transition to H2EV as an alternative to EV for passengers’ cars on a Spanish-like power sector. A simple H₂ demand estimation is developed and provided to CEVESA, an operation and expansion model for the Iberian Power System Electricity Market (MIBEL). For this study, CEVESA was extended to include the investments and operation decisions of H₂ production. Simulations were performed to determine the optimal evolution of the H₂ production capacity and of the electricity generation mix, considering scenarios with different shares of EV and H2EV. The impact of H2EV vs EV mobility is assessed based on the recent Spanish National Plan for Energy and Climate (NECP) as the base case scenario. Results show that, even if H2EV mobility alternative is still more costly than EV, H₂ production could provide a significant flexibility to the system that should also be appraised. Indeed, H2EV mobility could become a feasible and complementary alternative to decarbonize mobility by powering H₂ production with the renewable generation surplus. This, together with the on-going learning process of this technology that will decrease its production costs and increase its efficiency in the coming years, could boost, even more, the development of the H₂ economy.     

Highly active and stable electrocatalytic transition metal phosphides (Ni2P and FeP) nanoparticles on porous carbon cloth for overall water splitting at high current density

Highly active and stable hydrogen production at high current densities is required for practical application of electrocatalytic water splitting. In this study, highly active self-supporting electrodes with excellent durability were designed and developed for high-performance overall water splitting at a high current density. First, a colloid-based dip-coating method using porous carbon cloth (PCC) was introduced to obtain uniformly coated Ni and Fe nanoparticles on a conductive substrate. Then, the desired phase transitions of Ni and Fe to Ni₂P and FeP, respectively, proceeded by thermal phosphidation at optimum temperature. The uniformly interconnected Ni₂P layers on the PCC substrate (Ni₂P@PCC) and FeP layers on the PCC substrate (FeP@PCC) exhibited outstanding oxygen and hydrogen evolution reactions, respectively. When each electrode was adopted as an anode and a cathode for the overall water splitting cell, excellent performance was achieved, with a low operational voltage of 1.76 V and high durability for 100 hours at a high current density of 50 mA cm⁻².     

High energy-storage density under low electric fields and improved optical transparency in novel sodium bismuth titanate-based lead-free ceramics

A novel (1-x)Na_0.5Bi_0.5TiO₃-xBaHfO₃ (abbreviated as (1-x)NBT-xBH) transparent ceramic was fabricated by the solid state reaction method. X-ray diffraction analysis showed that NBT-based transparent ceramics exhibit a cubic-like perovskite structure and the solid solubility of BH in NBT reached to 0.15. The Landau-Devonshire theory and I-E curves revealed that the transition between the antiferroelectric like phase and the ferroelectric phase deeply relies on the variation of composition and free energy. One sample (x = 0.15) was found to show a high dielectric constant (˜2418±10%) over the temperature range 57–400 °C. These ceramics also exhibited a high discharge energy density (W_d) of 2.1 J/cm³ and a high maximum polarization P_m of 34 μC/cm² under relatively low electric fields which were less than 175 kV/cm. There was also high transparency in the visible spectra (more than 0.5) when the sample thickness was 250 μm.     

几种多态含能材料构型转变的DFT研究

为了从分子层面上对含能材料不同分子构型间的转变情况有一个直观认识,借助Gaussian 09软件,运用密度泛函理论(DFT),采用TS算法搜寻β-RDX→α-RDX、γ-HMX→β-HMX、ε-CL-20→β-CL-20及β-FOX-7→α-FOX-7在分子构型转变过程中的过渡态结构,确定了它们的构型转变过程;并通过计算吉布斯自由能随构型转变路径的变化,比较多态含能材料分子构型转变的难易程度。结果表明,由亚稳晶型到稳定晶型的转变首先会越过过渡态,克服自由能能垒转变为亚稳态结构,实现β-RDX→α-RDX、γ-HMX→β-HMX、ε-CL-20→β-CL-20及β-FOX-7→α-FOX-7分子构型转变分别需要克服的自由能能垒分别为5.25、22.21、9.69和10.24kJ/mol。因此,常温常压下β-RDX→α-RDX、γ-HMX→β-HMX、ε-CL-20→β-CL-20及β-FOX-7→α-FOX-7构型转变的难度大小排序为:HMX>>FOX-7>CL-20>RDX。     

Spontaneous relaxor to ferroelectric transition in lead-free relaxor piezoceramics and the role of point defects

The occupationally disordered structures and associated local polar fluctuations in lead-free relaxors determine their electrical properties that are also sensitive to external stimuli. These stimuli can lead to phase transitions, and the associated enhancement in the electro-mechanical responses necessitate a better understanding of these transitions. Here we report a non-canonical spontaneous phase transition from a relaxor to a ferroelectric phase in (Na_1/2Bi_1/2)TiO₃-BaTiO₃ with temperature. With the help of experiments (dielectric permittivity, diffraction, differential scanning calorimetry, polarization and Raman spectroscopy), a complete picture of the temperature evolution of relaxor behavior leading to this spontaneous phase transition has been reported. Furthermore, it has been shown that internal chemical pressure from oxygen vacancies can be utilized to tailor these phase transitions. Finally, an electric field-temperature phase diagram has been proposed with an emphasis on the influence of the defect chemistry. This work provides new insights into the origin of these spontaneous phase transitions.